Daniel Wellington Juliette lug width

The Daniel Wellington Juliette takes a 10 mm strap: all 3 references with a listed width in our database use 10 mm. Check the reference on your case back to be sure.

10 mm

Verification: Listed by the maker

Indicative information. Check your watch before buying a strap: whatsmylugwidth.com is not responsible for an incorrect size.

Collection3 references
10 mm
Illustration: 10 mm lugs drawn to scale, case size not on record

Lug widths across the line

The Daniel Wellington Juliette takes a 10 mm strap: all 3 references with a listed width in our database use 10 mm. Check the reference on your case back to be sure.

Filter references by lug width

3 Daniel Wellington Juliette references

Daniel Wellington Juliette references in our database. Each row says where its width comes from: listed by the maker (linked to the maker's page), two independent sources agree, or listed in our database and not yet verified by us.
Reference Lug width Source
Juliette Braided Mesh White Sunray Gold Gold / 20x26mm DW00100882 10 mm Maker
Juliette Braided Mesh White Sunray Rose Gold Rose Gold / 20x26mm DW00100883 10 mm Maker
Juliette Braided Mesh White Sunray Silver Silver / 20x26mm DW00100884 10 mm Maker

FAQ

What lug width does the Daniel Wellington Juliette use?

The Daniel Wellington Juliette takes a 10 mm strap: all 3 references with a listed width in our database use 10 mm. Check the reference on your case back to be sure. The Daniel Wellington Juliette ref. DW00100882, DW00100883 and 1 more take 10 mm (listed by the maker).

Where do these Daniel Wellington Juliette lug widths come from?

From our database, which lists 3 Daniel Wellington Juliette references, 3 of them with a listed width. Each row of the table says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.

Other Daniel Wellington collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.