Melbourne Watch Company

    Most Melbourne Watch Company watches use a 20 mm lug width: 22 of the 42 Melbourne Watch Company references with a listed width in our database (52%).

    Lug widths at Melbourne Watch Company

    Melbourne Watch Company collections

    The story ยท Since 2013

    The Melbourne Watch Company story

    1. 2013 Founded in Melbourne, Australia by Sujain Krishnan.
    2. 2013 The brand launched its first original design, the Flinders Automatic, through an Indiegogo crowdfunding campaign.
    3. 2018 Released the five-piece Flinders Heritage collection; by then the brand had a showroom in Carlton.

    FAQ

    What lug width do Melbourne Watch Company watches use?

    20 mm is the most common (52% of Melbourne Watch Company references with a listed width), followed by 22 mm.

    Do all Melbourne Watch Company watches take the same strap size?

    No. Melbourne Watch Company uses 2 different lug widths across its collections, so check your exact model or reference.

    When was Melbourne Watch Company founded?

    Melbourne Watch Company was founded in 2013 in Melbourne, Australia by Sujain Krishnan.

    Help

    What is lug width?

    The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

    Measure it in 30 seconds

    1. Take the strap off, or look at the back of it: many straps print their width.
    2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
    3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

    Strap, quick release or system?

    Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.